Water and sewage pumping stations | water pumping station
In catchment systems where gravity drainage is not possible and it is necessary to raise the media to a higher level, NavoTech's NAVO water and sewage pumping stations are used. These solutions are also known as water pumping stations.
NavoTech water pumping stations operate at flow rates ranging from the smallest (where the lower limit is determined by the flow rate in the discharge pipeline) to several hundred liters per second. They operate as two-, three-, or even four-pump systems, with the highest flow rates installed in two tanks acting as a system of communicating vessels. All materials used in the pumping station are designed for operation in aggressive environments.
Selection of pumping stations, water pumping stations and equipment is carried out individually according to the needs of the project and the customer's requirements by the NavoTech Technical Department. This approach is aimed at preparing an offer that meets your needs and requirements, and at the same time is adapted to the field conditions, applicable health and safety regulations and industry agreements.
Water pumping stations and sewage pumping stations are a complete pumping unit delivered in its entirety to the place of installation, we perform assembly and technological start-ups. As part of our orders, we offer and we implement service contracts pumping station.
Water pumping station and sewage pumping station solutions proposed by NavoTech:
- NAVO/B in a concrete tank, concrete min. C35/45,
- NAVO/PE in a polyethylene tank, stiffness min. SN4.
Water and sewage pumping stations
- Water pumping station and sewage pumping station - CONSTRUCTION
- Water pumping station - sewage pumping station - CONTROL
In terms of equipment quality and operational reliability, NavoTech does not compromise and therefore uses only selected and tested materials in terms of their performance and chemical resistance.
NavoTech equips water pumping stations with pumps from the largest Western manufacturers: Grundfos, Lowara, KSB, ABS, as well as Polish ones: Metalchem Warszawa, Meprozet Brzeg.
NAVO/B reinforced concrete pumping station tanks are manufactured using C35/45 concrete, with a W-8 water resistance and F-150 frost resistance. They are corrosion-resistant in groundwater and sewage environments. Designed for installation in green areas or areas with heavy vehicular traffic.
Double-walled pumping station tanks NAVO/PE made of polyethylene in the shape of a cylinder with a vertical axis, are made on the basis of double-walled, structural, spiral pipes characterized by high circumferential stiffness, min. SN4, very good abrasion resistance and complete chemical resistance.
As a standard, all tanks are topped with a stainless checker plate cover.
The basic element of the control and automation system is the power supply and control cabinet of the instrumentation and control equipment with optical and sound alarm signaling, installed next to the tank.
It is possible to mount the cabinet inside the building located near the pumping station. The housing of the cabinet is lockable, resistant to weather conditions and provides the required degree of protection IP54. At the customer's request, we offer monitoring by means of, for example, GSM, GPRS mobile telephony, radio signal or cable, informing about the operating states of the pumping station.
INFORMATION MATERIALS
Catalog:Water and sewage pumping stations- View online: Navotech – Sewage pumping stations by NavoTech – Issuu
Implementation gallery
The water and sewage pumping stations offered by NavoTech are of high quality and reliability. Our company doesn't compromise on equipment, therefore we use only materials selected and tested for their performance and chemical resistance. Our pumping stations are equipped with pumps from leading manufacturers, such as Grundfos, Lowara, KSB, and ABS, as well as Polish brands such as Metalchem Warszawa and Meprozet Brzeg.
Pumping stations are available in two variants: reinforced concrete NAVO/B pumping station tanks and double-walled NAVO/PE pumping station tanks. The reinforced concrete tanks are manufactured from C35/45 concrete and are waterproof, frost-resistant, and corrosion-resistant. The double-walled NAVO/PE tanks, on the other hand, are made of polyethylene and characterized by high ring stiffness, excellent abrasion resistance, and complete chemical resistance.
The basic element of the control and automation system is the power supply and control cabinet of the instrumentation and control equipment with optical and sound alarm signaling, installed next to the tank. It is possible to mount the cabinet inside the building located near the pumping station. At the customer's request, the company offers monitoring via GSM, GPRS, radio signal or cable, informing about the operating status of the pumping station.